12000Ls - California Instruments 12000Ls Power Source - Optional Ethernet LAN interface...
- Part Number:
- 12000Ls
- Model Number:
- 12000Ls
- Make:
- CALIFORNIA INSTRUMENTS
- Lead Time:
- Available
- Qty In Stock:
- Available
California Instruments 12000Ls Power Source - Optional Ethernet LAN interface has been added. (Option -LAN) The front panel graphic design has been enhanced for a more pleasing look. Simple Type: Power Supply
The Ls Series is an improved version of the classic California Instruments L Series AC power sources. It provides many basic AC source capabilities at an economical cost. Additional capabilities such as arbitrary waveform generation and harmonic measurements can be added as options. The Ls Series can be ordered in either single phase (-1) or three phase (-3) configurations. Power levels range from 3 kVA to 6 kVA in a single chassis. Multiple chassis can be combined for power levels up to 18 kVA. The Ls Series is completely microprocessor controlled and can be operated from a simple front panel keypad. A pair of analog controls located next to the backlit alphanumeric LCD display allows output voltage and frequency to be slewed up or down dynamically. For more advanced operations, a series of menus is provided using a dual line high contrast LCD display.
For Resellers and High Volume Orders:
Please request a quote to obtain preferred pricing.
Features
- None Available
Specifications
- Air Intake/Exhaust: Forced air cooling, side air intake, rear exhaust
- Diagnostics: Built-in self test available over bus. (*TST).
- Dimensions (per chassis): Height:10.5" (267 mm), Width:19" (483 mm), Depth:23.7" (602 mm)
- Efficiency: 75 % typical
- Ethernet Interface: Local Area Network 10BaseT, 100BaseT, RJ45 connector. (Option -LAN)
- Frequency: ± 0.025% 45 Hz - 819.1 Hz, ± 0.07% > 819.1 Hz
- Frequency Range: With -HF option:3000Ls, 4500Ls, 6000Ls:45 Hz -5000 Hz, 9000Ls, 12500Ls, 13500Ls, 18000Ls:45 Hz -2000 Hz
- Harmonic distortion: < 1% (At full scale voltage, full resistive load.) Isolation
- Hold-up time: At least 10 ms
- IEEE-488 Interface: IEEE-488 (GPIB) talker listener. Subset:AH1, DC1, DT1, L3, RL2, SH1, SR1, T6
- Inrush Current (per phase): @ 180-254 V 50 Apeak, @ 360-440 V 83 Apeak
- Line Frequency: 47 - 440 H
- Line Regulation: Less than ± 0.02% for 10% line change
- Load Regulation: Less than ± 0.1% FS
- Maximum power per phase: Model:3000Ls Single Phase 3000 VA Three Phase 1000 VA, Model:4500Ls Single Phase 4500 VA Three Phase 1500 VA, Model:6000Ls Single Phase
- Operating Temperature: 0 to 35° C, full power.
- Output noise: -100 mVrms typical (20 kHz to 1 MHz)
- Phase: ± 1° 45- 100 Hz, ±(1° + 1°/kHz) 100 Hz - 1 kHz
- Power Factor: 0.6 typical
- Programming Accuracy (25°C±5°C)Voltage (rms): ±(0.05% + 0.25) V from 5.0 V to FS
- Rear Panel Connectors: Three phase AC Input terminal block with safety cover, Three phase AC Output terminal block with safety cover, IEEE-488 (GPIB) connector (Option -GPIB), 9 pin D-Shell RS232C connector, Remote Inhibit (INH) and Discrete fault Indicator (DFI), Remote voltage sense terminal block, Trigger In1 and Trigger Out1, System Interface connectors, Aux. Output (Option -AX) (*RS232 DB9 to DB9 cable supplied)
- Setup storage: 16 complete instrument setups
- Storage Temperature: -40 to 85° C.
- Transient lists storage: 100 transient steps per list (SCPI mode) or 16 transient
- Trigger input: Triggers measurements or transient steps SMA connector: 10K pull-up
- Trigger output: SMA connector: HC TTL output
- Vibration and Shock: Designed to meet NSTA project 1A transportation levels
- Voltage: Models 3000Ls, 4500Ls, 9000Ls, 13500Ls:Standard: 208-230 ±10% VAC, (L-L, 3 Phase) Option -400: 360-440 VAC, (L-L, 3 Phase) Models 6000Ls, 12000Ls, 18000Ls:Standard: 208-230 + 10% VAC,(L-L, 3 Phase)
- Voltage Ranges: Low:0-135 Volt, High:0-270 Volt
- Voltage Resolution: 100 mV
- Weight (per chassis): 193 lbs / 87.7 Kg net. 280 lbs / 127.3 Kg shipping
Applications
- None Available
Aliases
- None Available
